{
    "type": "filament",
    "from": "User",
    "inherits": "Generic PETG @BBL A1",
    "name": "Elegoo Rapid PETG (Nozzle4) @BBL A1",
    "filament_settings_id": [
        "Elegoo Rapid PETG (Nozzle4) @BBL A1"
    ],
    "filament_vendor": [
        "Elegoo"
    ],
    "nozzle_temperature_initial_layer": [
        "250"
    ],
    "nozzle_temperature": [
        "250"
    ],
    "textured_plate_temp_initial_layer": [
        "70"
    ],
    "textured_plate_temp": [
        "70"
    ],
    "hot_plate_temp_initial_layer": [
        "70"
    ],
    "hot_plate_temp": [
        "70"
    ],
    "filament_max_volumetric_speed": [
        "13"
    ],
    "filament_flow_ratio": [
        "0.99"
    ],
    "fan_min_speed": [
        "30"
    ],
    "fan_max_speed": [
        "80"
    ],
    "filament_density": [
        "1.26"
    ],
    "filament_notes": "Nozzle4 print settings guide, Elegoo Rapid PETG. https://nozzle4.com/tools/print-settings/\nSource: OrcaSlicer filament library, Elegoo profiles, by Elegoo (synced from the wujie-elegoo account, PR #13790, 27 May 2026). https://github.com/OrcaSlicer/OrcaSlicer/tree/b5ef24e7ffa1b928071a22195657e8dc1db9360c/resources/profiles/OrcaFilamentLibrary/filament/Elegoo (AGPL-3.0)\nThe brand profile is not specific to any printer.\nBrand profile says 18 mm³/s for any printer; capped at 13, Bambu's own PETG Basic limit on the A1\nStarting values, not measured by Nozzle4. Run Bambu Studio flow dynamics and flow rate calibration on your own spool.\nDerived from AGPL-3.0 slicer profiles; this file is distributed under AGPL-3.0.",
    "version": "2.7.0.8"
}