Nozzle4 filament presets for the Bambu Lab A1, 0.4 mm nozzle
https://nozzle4.com/tools/print-settings/

Import: Bambu Studio > File > Import > Import Configs, select every .json in this folder.
Each preset inherits Bambu's Generic PLA or Generic PETG for the A1 and changes only the
values its source gives. They are starting values, not measurements; run flow dynamics and
flow rate calibration on your own spool before trusting them for a long print.

Sources
- Bambu Studio system profiles 02.07.00.08 (Generic PLA, Generic PETG, PLA Basic, PETG Basic). Bambu Lab. https://github.com/bambulab/BambuStudio/tree/master/resources/profiles/BBL/filament (AGPL-3.0)
- OrcaSlicer filament library, Elegoo profiles. Elegoo (synced from the wujie-elegoo account, PR #13790, 27 May 2026). https://github.com/OrcaSlicer/OrcaSlicer/tree/b5ef24e7ffa1b928071a22195657e8dc1db9360c/resources/profiles/OrcaFilamentLibrary/filament/Elegoo (AGPL-3.0)
- OrcaSlicer filament library, JAYO profiles for Bambu Lab. JAYO (JAYO3D-Official account, PR #15481, 18 Sep 2026). https://github.com/OrcaSlicer/OrcaSlicer/tree/b5ef24e7ffa1b928071a22195657e8dc1db9360c/resources/profiles/OrcaFilamentLibrary/filament/JAYO/BBL (AGPL-3.0)
- OrcaSlicer filament library, COEX profiles for Bambu Lab. COEX (bonninjd account, company listed as Coex 3D, PR #10924, 20 Oct 2025). https://github.com/OrcaSlicer/OrcaSlicer/tree/b5ef24e7ffa1b928071a22195657e8dc1db9360c/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL (AGPL-3.0)
- OrcaSlicer filament library, Polymaker Panchroma profiles for Bambu Lab. Polymaker (Pepe-Polymaker account, PR #10152, 17 Jul 2025). https://github.com/OrcaSlicer/OrcaSlicer/tree/b5ef24e7ffa1b928071a22195657e8dc1db9360c/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL (AGPL-3.0)
- OrcaSlicer filament library, Overture profiles for Bambu Lab. Overture (Overture3D account, PR #10631, 9 Sep 2025). https://github.com/OrcaSlicer/OrcaSlicer/tree/b5ef24e7ffa1b928071a22195657e8dc1db9360c/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL (AGPL-3.0)
- OrcaSlicer filament library, eSUN profiles. OrcaSlicer maintainers (flow limit lowered in PR #12329, 16 Feb 2026); not submitted by eSUN. https://github.com/OrcaSlicer/OrcaSlicer/tree/b5ef24e7ffa1b928071a22195657e8dc1db9360c/resources/profiles/OrcaFilamentLibrary/filament/eSUN (AGPL-3.0)
- eSUN PETG technical data sheet v2.0 (Jul 2025). eSUN. https://www.esun3d.com/media/esun/catalog/certification/product/PETG/eSUN_PETG_Filament_TDS_1.pdf
- Prusament PLA technical datasheet v1.1 (16 Feb 2022). Prusa Polymers. https://prusament.com/wp-content/uploads/2022/10/PLA_Prusament_TDS_2021_10_EN.pdf
- Prusament PETG technical datasheet v1.1 (16 Feb 2022). Prusa Polymers. https://prusament.com/wp-content/uploads/2022/10/PETG_Prusament_TDS_2021_10_EN.pdf

License
These presets are derived from slicer profiles published under the GNU Affero General Public
License v3.0 (Bambu Studio, OrcaSlicer) and are distributed under the same license.
Full text: https://www.gnu.org/licenses/agpl-3.0.txt
