New machinesNews

EOS's triple-laser HELIOR cuts SLS post-processing time up to 80%

Photo: EOS GmbH, Press image

EOS unveiled the HELIOR at Formnext 2026, an SLS system with three 70W lasers and a 154-liter build volume (700 x 380 x 580 mm), the same footprint as the EOS P 770 but with one more laser than that machine’s two. EOS says five pilot customers, including FKM Additive Manufacturing, Prototal Group and Materialise, validated the system before launch, and the first units ship to customers this month.

Spec Value
Lasers 3 x 70W
Build volume 700 x 380 x 580 mm (154 L)
Post-processing time cut up to 80% vs. earlier EOS polymer systems
Materials at launch PA 2200, PA 2220
Commercial availability December 2026

The 80% post-processing reduction comes mainly from a redesigned roller recoater that lets speed and rotation be set independently, producing a softer powder bed that cuts blast and depowdering time. Dynamic load-balancing keeps all three lasers working across the full chamber, and infrared monitoring can flag a defective part mid-build and skip it rather than halting the job.

New geometry-aware exposure parameters are meant to hold dimensional accuracy constant regardless of where a part sits in the frame. EOS’s polymer portfolio lead, Rüdiger Herfrid, said the company’s design target was fitting six consecutive jobs into a 24-hour cycle.

FKM’s Matthias Henkel said the throughput gain “fits perfectly with our single-shift operation,” letting the company complete a full build job daily. Prototal’s Markus Schrittwieser put it in his own terms: “If we can increase the output of the machine while reducing the manual work required along the process chain, we can manufacture more with the same team.” Neither outlet covering the launch published a price, and no laser-exposure speed or scan-rate figures were given for the system itself.

EOS built HELIOR on the same ten-year-old platform underlying its existing polymer line, the same build-on-what-works approach it used for the M4 ONYX metal system last year, which Beehive Industries followed with a $50 million commitment.

Sources